itm products – MfgTechUpdate https://mfgtechupdate.com Your source to Latest Machine Tool Update Tue, 16 Dec 2014 07:19:36 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.2 HSS Twist drills: Jobber & Taper shank https://mfgtechupdate.com/hss-twist-drills-jobber-taper-shank/ Tue, 16 Dec 2014 07:19:36 +0000 http://mfgtechupdate.com/?p=7296 ITM offers a wide range of High Speed Steel Twist Drills available in metric, imperial, number sizes and wire gauge sizes: Size Range:- 0.5 mm to 35 mm : 3/64” to 1.3/8”. Material: HSS-M2 Note:- Jobber can be supplied as per Customer needs on request as follows:- • Intermediate Diameters • Quick spiral or slow […]]]>
ITM offers a wide range of High Speed Steel Twist Drills available in metric, imperial, number sizes and wire gauge sizes:
Size Range:- 0.5 mm to 35 mm : 3/64” to 1.3/8”.
Material: HSS-M2
Note:- Jobber can be supplied as per Customer needs on request as follows:- • Intermediate Diameters • Quick spiral or slow spiral Drills,Jobber with Tenon. • In different grades of HSS like M35,M42 etc. • Various surface coating like TiN, TiAIN etc. • Special geometry to suit various application. • Left Hand Drills above 1/8” (3.0) can also be supplied
    Types:

  • Parallel Shank Twist Drills – Jobber Series
  • Parallel Shank Twist Drills – Stub Series
  • Parallel Shank Twist Drills – Long Series
  • Parallel Shank Twist Drills – Extra Long Series
  • Taper Shank Twist Drills with Standard Shank
  • Taper Shank Twist Drills – Long Series
  • Parallel Shank Core Drills
  • Shell Core Drills
  • Taper Shank Twist Drills – for Taper Pin Holes
]]> HSS Tool Bits https://mfgtechupdate.com/hss-tool-bits/ Sun, 14 Dec 2014 07:23:14 +0000 http://mfgtechupdate.com/?p=7302 Backed by the high quality of High Speed Steel material ITM manufactures a comprehensive range of HSS Tool Bits. Dagger Toolbits ensure maximum red hot hardness for greater endurance. Rigorous and regular metallurgical tests are undertaken to analyse the quality as well as the composition of the raw materials used. These include determination of decarb, […]]]>

Backed by the high quality of High Speed Steel material ITM manufactures a comprehensive range of HSS Tool Bits. Dagger Toolbits ensure maximum red hot hardness for greater endurance.
Rigorous and regular metallurgical tests are undertaken to analyse the quality as well as the composition of the raw materials used. These include determination of decarb, segregation, grain size, response to heat treatment etc., thus guaranteeing smooth, trouble free performance.
Size Range : Square tools size 5mm – 25mm :3/16”-1”Material : HSS M2 & T42. Note :- • Cryogenic treatment for special applications on request. • All square tool bits are supplied with the bevel angel of 150°.

]]> Masonry Drills https://mfgtechupdate.com/masonry-drills/ Fri, 12 Dec 2014 07:26:12 +0000 http://mfgtechupdate.com/?p=7304 Carbide Tipped Masonry Drills are manufactured from Alloy Steel, have Ground Flutes, are in Bright Finish and combined with ITM’s unique brazing and treatment process results in withstanding shock and outstanding resistance to wear during its use. RANGE : Type : Masonry Drills are available in categories, Economy, Deluxe Size Range:- 3mm to 13mm : […]]]>

Carbide Tipped Masonry Drills are manufactured from Alloy Steel, have Ground Flutes, are in Bright Finish and combined with ITM’s unique brazing and treatment process results in withstanding shock and outstanding resistance to wear during its use.

  • RANGE : Type : Masonry Drills are available in categories, Economy, Deluxe Size Range:- 3mm to 13mm : 1/8” to ½” in
  • Categories Economy Masonry Drills : Suitable for all general Purpose. Available in 10pcs packing Deluxe
  • Masonry Drills : Specially developed for use on tougher material like Stonework, Concrete and Marble etc.
]]> HSS Centre Drills https://mfgtechupdate.com/hss-centre-drills/ Wed, 10 Dec 2014 08:48:47 +0000 http://mfgtechupdate.com/?p=7308 Available in Type ‘A’, ‘B’ & ‘R in metric  Size Range:- Type A- For general applications – A1 x 3.15 to A10 x 25 BS 1 to BS7 Type B- For index applications – B2 x 8 to B8 x 25 Type R- For heavy duty applications – R1 x 3.15 to R10 x 25 Material: HSS-M2 Note:- Centre Drills […]]]>

Available in Type ‘A’, ‘B’ & ‘R in metric 
Size Range:-
Type A- For general applications – A1 x 3.15 to A10 x 25 BS 1 to BS7
Type B- For index applications – B2 x 8 to B8 x 25
Type R- For heavy duty applications – R1 x 3.15 to R10 x 25 Material: HSS-M2
Note:- Centre Drills can be supplied as per Customer needs on request as follows:-
• In different grades of HSS like M35, M42 etc.

  • Various surface coating like TiN, TiAIN etc.
  • Special as per Customer’s Drawing.
  • Left Hand Centre Drills – LH Type ‘R’ not possible

Size Range : 3 mm to 50 mm,1/8” to 2”
Material: HSS-M2 Note:- can also be supplied as per specific Customers needs as follows:
• Non standard and special as per Customers drawing
• Intermediate diameters
• In different grades of HSS like M35, M42 etc.
• Various surface coating like TiN, TiAIN etc

]]> HSS Threading Taps https://mfgtechupdate.com/hss-threading-taps/ Tue, 09 Dec 2014 09:07:09 +0000 http://mfgtechupdate.com/?p=7312 Available in a wide range of sizes, types and combinations.RANGE : Type: Hand and Short Machine Taps, Long Shank Machine Taps, Nut Taps, Pipe Taps, BSW, BSF,UNC, UNF,NPSF,NPS,NPT,NPTF,NGT and Special Taps. Size Range:– 3mm – 100mm : 1/8”-4” Material: HSS-M2Note:- Taps can be supplied as per Customer needs on request as follows:- • Serial or […]]]>
Available in a wide range of sizes, types and combinations.RANGE : Type: Hand and Short Machine Taps, Long Shank Machine Taps, Nut Taps, Pipe Taps, BSW, BSF,UNC, UNF,NPSF,NPS,NPT,NPTF,NGT and Special Taps.
Size Range:– 3mm – 100mm : 1/8”-4” Material: HSS-M2Note:- Taps can be supplied as per Customer needs on request as follows:- • Serial or Non-serial • Individual Pieces or in Sets • Different types like Straight, Spiral Flute, Spiral point & Fluteless(Roll) • In different grades of HSS like M35, M42 etc. • Various surface coating like TiN, TiAIN ,TICN etc. • Special Taps as per Customer’s Drawing.
    Types;

  • Hand & Short Machine Taps
  • Hand Taps – BSW and BSF
  • Hand Taps – UNC and UNF
  • Long Shank Machine Taps
  • Hand Taps BSCY Form and BS Conduit Form
  • Parallel Pipe Taps – BSP and NPS
  • Taper Pipe Taps – BSPT and NPT
  • Tapers Pipe Taps (NGT)
]]> Engineer’s Files https://mfgtechupdate.com/engineers-files/ Tue, 09 Dec 2014 08:50:40 +0000 http://mfgtechupdate.com/?p=7310 Dagger Brand Files are made from the finest file steel material on State-of-the-Art Production Line. Files are manufactured on unique hydro pneumatically controlled machines resulting in uniform Teeth geometry and consistent desired finish cutting quality with. RANGE : Type :- Machinist Files, Saw Files, Rasps, Special Files & Mill Files Size :- 100mm to 350mm […]]]>

Dagger Brand Files are made from the finest file steel material on State-of-the-Art Production Line. Files are manufactured on unique hydro pneumatically controlled machines resulting in uniform Teeth geometry and consistent desired finish cutting quality with.

RANGE :
Type :- Machinist Files, Saw Files, Rasps, Special Files & Mill Files
Size :- 100mm to 350mm : 4” to 14” Cuts :- Single cut, Double cut, Bastard cut, 2nd cut, Smooth Cut & Rasp CutShapes :- Rectangle, Square, Round, Triangle, Half Round Files are available in 10pcs packing up to 250mm & 5pcs packing for above 250mm

]]> HSS Reamers https://mfgtechupdate.com/hss-reamers-2/ Sun, 07 Dec 2014 09:16:13 +0000 http://mfgtechupdate.com/?p=7318 Available in a wide range of diameters to suit specific reaming operations to provide perfect accuracy and optimum surface finish. Type : Parallel Hand Reamers, Long Fluted Machine Reamers, Chucking Reamers with Parallel Shank or Taper Shank, Bridge Reamers, Taper Pin Reamers, Socket Reamers, Machine Jig Reamers, Centre Reamers, Shell Reamers, Taper Shank Extra Long […]]]>
Available in a wide range of diameters to suit specific reaming operations to provide perfect accuracy and optimum surface finish.
Type : Parallel Hand Reamers, Long Fluted Machine Reamers, Chucking Reamers with Parallel Shank or Taper Shank, Bridge Reamers, Taper Pin Reamers, Socket Reamers, Machine Jig Reamers, Centre Reamers, Shell Reamers, Taper Shank Extra Long Machine Reamers etc.
Size Range : 3.00mm – 76.20mm : 1/8” – 3”
Material : HSS M2
Note : Reamers can also be supplied as per specific Customers needs as follows: • Non standard and special as per Customers drawing • Intermediate diameters • In different grades of HSS like M35, M42 etc. • Various surface coating like TiN, TiAIN etc
    Types:

  • Parallel Hand Reamers
  • Long Fluted Machine Reamers
  • Parallel Machine Reamers
  • Chucking Reamers with Parallel Shank
  • Chucking Reamers with Taper Shank
  • Machine Jig Reamers
  • Shell Reamers
  • Parallel Shank Socket Reamers
  • Hand Taper Pin Reamers
  • Machine Taper Pin Reamers
  • Machine Bridge Reamers
  • Hole Mills unguided – Type A
  • Hole Mills Guided – Type B
  • Taper Pipe Reamers.
]]>