![\"D1\"](\"http:\/\/mfgtechupdate.com\/wp-content\/uploads\/2014\/08\/D1.jpg\")
<\/a>First is the Doosan VCF 850LSR, a vertical machining center featuring a traveling column design with available tilting spindle head. The VCF series is capable of machining a wide range of parts – utilizing up to 5 axes simultaneously. Distinguishing the VCF series within the Doosan range is its generous work envelope, allowing 3,000mm (118\u201d) of travel distance in the X-axis and 850mm (33.5\u201d) of travel in the Y-axis. Furthermore, the series realizes a high degree of flexibility through a wide range of configurations, including an optional tilting head, built-in 5-axis rotary table and an available center divider allowing the operator to make chips on one side of the table, while setting-up the next job on the other.Next is Doosan\u2019s all new FM200\/5AX linear vertical machining center. This high-speed, full contouring, 5-axis machining center is built upon a rigid bridge design. The X, Y, and Z axes are driven by high precision linear motors, providing extra high-speed acceleration\/deceleration and cutting federates. The 4th and 5th rotary axes feature a direct drive motor, matching the high speeds delivered in X,Y and Z. The spindle speed available on the FM200\/5AX Linear is a blistering fast 45,000 RPM, to achieve the highest surface finish possible.<\/p>\nFinally, there is Doosan\u2019s 3rd generation Mill-Turn Multi-tasking Machine, the Puma SMX 3100S, set to make its North American debut at IMTS. The Puma SMX 3100S integrates the capabilities of a vertical machining center and horizontal turning center into one platform. The Puma SMX Series distinguishes itself with a more rigid 90? vertical axis and forward positioned automatic tool changer, for improved milling capabilities as well as enhanced operator ergonomics.<\/p>\n